830-2

Technical Characteristics

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Shaft Diameter

  0.250 inches maximum

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef

• Function Conformity Tolerance Per Section

  -0.50/+0.50 single section

• Mounting Bushing Length

  0.250 inches nominal

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Terminal Type And Quantity

  3 tab, solder lug

• Electrical Resistance Per Section

  500.000 ohms single section

• Screw Thread Diameter

  0.375 inches nominal

• Body Diameter

  2.000 inches maximum

• Nonturn Device Location

  at 12 oclock

• Features Provided

  nonmetallic shaft

• Function Conformity Per Section

  single section independent linearity

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  80.0 single section

• Power Dissipation Rating Per Section In Watts

  3.0 free air single section

• Overall Diameter

  2.250 inches nominal

• Maximum Starting Torque

  5.00 inch-ounces

• Shaft Style

  round, slotted

• Body Style

  cylindrical bushing mounted

• Rotary Actuator Travel In Angular Deg

  1080.0 nominal

• Effective Electrical Rotation In Deg Angular Rotation

  1080.0 nominal

• Nonturn Device Radius

  0.484 inches minimum and 0.610 inches maximum

• Actuator Travel Control Feature

  stops

• Screw Thread Quantity Per Inch

  32.0

• Section Quantity

  1

• Body Length

  1.375 inches maximum

• Overall Length

  2.250 inches nominal

• Shaft Radial Play

  0.005 inches

• Function Characteristic Per Section

  single section linear

• Shaft Length

  0.875 inches nominal

• Terminal Location

  radially positioned over less than half the circumference

• Shaft End Play

  0.01500 inches

• Mounting Method

  standard bushing

• Test Data Document

  99971-7432518 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)