RL270B2

Technical Characteristics

• Actuator Type

  double ended shaft

• Function Characteristic Per Section

  all sections linear

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 all sections

• Section Quantity

  4

• Power Dissipation Rating Per Section In Watts

  3.0 free air single section

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  236.0 1st section

• Electrical Resistance Per Section

  490.0 percent, rated amperes c and better finish

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  236.0 3rd section

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 2nd section

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  236.0 4th section

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 3rd section

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 4th section

• Mounting Hole/Stud Circle Diameter

  1.250 inches nominal

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  221.0 2nd section

• Body Length

  1.750 inches nominal

• Electrical Resistance Per Section

  490.0 percent, rated amperes c and better select

• Terminal Type And Quantity

  16 solder stud

• Shaft Style

  round

• Electrical Resistance Per Section

  490.0 percent, rated amperes c and better v.g. stepping

• Mounting Facility Quantity

  3

• Function Conformity Tolerance Per Section

  -0.10/+0.10 1st section

• Fixed Tap Quantity Per Section

  1 all sections

• Function Conformity Tolerance Per Section

  -0.10/+0.10 3rd section

• Body Style

  cylindrical studs mounted

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 1st section

• Body Diameter

  2.000 inches nominal

• Electrical Resistance Per Section

  29.218 percent, rated amperes c and better industrial clears

• Function Conformity Per Section

  all sections independent linearity

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unc

• Function Conformity Tolerance Per Section

  -0.15/+0.15 2nd section

• Mounting Method

  threaded hole

• Tap Location Tolerance Per Section

  -0.5/+0.5 deg angular rotation all sections

• Shaft Diameter

  0.249 inches nominal

• Screw Thread Diameter

  0.164 inches nominal

• Terminal Location

  radially positioned over more than half the circumference

• Shaft Length

  0.750 inches nominal

• Screw Thread Quantity Per Inch

  32.0

• Function Conformity Tolerance Per Section

  -0.10/+0.10 4th section