HSM80

Technical Characteristics

• Mounting Facility Quantity

  4 single group

• Center To Center Distance Between Mounting Facilities Parallel To Length

  1.672 inches minimum single mounting facility single center group and 1.702 inches maximum single mounting facility single center group

• Terminal Type And Quantity

  11 turret

• Center To Center Distance Between Mounting Facilities Parallel To Width

  1.422 inches minimum single mounting facility single center group and 1.452 inches maximum single mounting facility single center group

• Winding Function And Quantity

  2 primary single component and 2 secondary single component

• Maximum Transformer Power Rating

  5.0 watts single component

• Thread Class (Non-Core)

  2a single group

• Impedance Rating In Ohms

  5000.0 nominal single component 2nd primary

• Body Length

  1.187 inches minimum and 1.312 inches maximum

• Body Height

  3.000 inches minimum and 3.125 inches maximum

• Mounting Method

  threaded stud single group

• Thread Direction (Non-Core)

  right-hand single group

• Winding Shielding Method

  grounded to inclosure, core and brought out to terminal single component

• Primary To Secondary Turn Ratio

  5-3/4 to 1 single component

• Hazardous Locations/Environmental Protection

  moisture resistant and vibration resistant

• Frequency Response Tolerance In Decibels (Non-Core)

  -1.0/+1.0 single component

• Maximum Operating Temp

  105.0 deg celsius

• Winding Operating Current

  20.0 milliamperes maximum of standard range b and better drop siding single component all primary

• Unpackaged Unit Weight (Non-Core)

  2.000 pounds

• Body Width

  1.937 inches minimum and 2.062 inches maximum

• Reliability Indicator

  not established

• Winding Tap Location (Non-Core)

  center tap single component all secondary

• Impedance Rating In Ohms

  20000.0 nominal single component 1st primary

• Inclosure Type

  hermetically sealed

• Impedance Rating In Ohms

  750.0 nominal single component 1st secondary

• Thread Series Designator

  unc single group

• Impedance Rating In Ohms

  312.5 nominal single component 2nd secondary

• Test Data Document

  56232-1651983 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Cubic Measure (Non-Core)

  8.4 cubic inches

• Nominal Thread Size

  0.138 inches single group

• Frequency Rating

  50.0 hertz minimum single component and 20.0 kilohertz maximum single component