3450S425-203-104

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Pilot Diameter

  1.8750 inches nominal

• Shaft End Play

  0.005 inches

• Section Quantity

  2

• Power Dissipation Rating Per Section In Watts

  5.0 free air all sections

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -30.0/+30.0 all sections

• Undercut Diameter

  2.000 inches nominal

• Function Characteristic Per Section

  all sections linear

• Maximum Running Torque

  1.75 inch-ounces

• Mounting Method

  flange

• Tap Location From Ccw Terminal Per Section In Ohms

  2160.0 2nd section and 720.0 2nd section and 360.0 2nd section and 2520.0 2nd section and 1440.0 2nd section and 1080.0 2nd section and 1800.0 2nd section and 2880.0 2nd section and 3240.0 2nd section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 all sections

• Maximum Starting Torque

  2.25 inch-ounces

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Electrical Resistance Per Section

  20.0 percent, rated amperes c and better finish

• Shaft Style

  round

• Function Conformity Tolerance Per Section

  -0.50/+0.50 1st section

• Shaft Diameter

  0.250 inches nominal

• Body Style

  cylindrical servo mounted

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Shaft Length

  0.625 inches nominal

• Tap Location Tolerance Per Section

  -1.0/+1.0 deg angular rotation 2nd section

• Function Conformity Per Section

  all sections independent linearity

• Undercut Width

  0.0730 inches nominal

• Pilot Length

  0.0620 inches nominal

• Actuator Type

  single shaft

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Reliability Indicator

  not established

• Pilot Diameter Runout

  0.00200 inches

• Function Conformity Tolerance Per Section

  -0.25/+0.25 2nd section

• Terminal Type And Quantity

  15 tab, solder lug

• Lateral Runout

  0.003 inches

• Body Length

  4.125 inches maximum

• Fixed Tap Quantity Per Section

  9 2nd section

• Mounting Lip Depth

  0.0940 inches nominal

• Terminal Location

  radially positioned over less than half the circumference

• Mounting Lip Diameter

  1.9950 inches minimum and 2.0050 inches maximum

• Shaft Runout

  0.001 inches

• Body Diameter

  1.995 inches minimum and 2.005 inches maximum

• Electrical Resistance Per Section

  100.0 percent, rated amperes c and better industrial clears