AMB472
Resistors
RESISTOR,VARIABLE,WIRE WOUND,PRECISION
AMB472
RESISTOR,VARIABLE,WIRE WOUND,PRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Actuator Travel Control Feature
stops
-
Pilot Diameter
1.8750 inches nominal
-
Shaft End Play
0.005 inches
-
Section Quantity
2
-
Power Dissipation Rating Per Section In Watts
5.0 free air all sections
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-30.0/+30.0 all sections
-
Undercut Diameter
2.000 inches nominal
-
Function Characteristic Per Section
all sections linear
-
Maximum Running Torque
1.75 inch-ounces
-
Mounting Method
flange
-
Tap Location From Ccw Terminal Per Section In Ohms
2160.0 2nd section and 720.0 2nd section and 360.0 2nd section and 2520.0 2nd section and 1440.0 2nd section and 1080.0 2nd section and 1800.0 2nd section and 2880.0 2nd section and 3240.0 2nd section
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
85.0 all sections
-
Maximum Starting Torque
2.25 inch-ounces
-
Resistance Tolerance Per Section In Percent
-5.0/+5.0 all sections
-
Electrical Resistance Per Section
20.0 percent, rated amperes c and better finish
-
Shaft Style
round
-
Function Conformity Tolerance Per Section
-0.50/+0.50 1st section
-
Shaft Diameter
0.250 inches nominal
-
Body Style
cylindrical servo mounted
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
40.0 all sections
-
Rotary Actuator Travel In Angular Deg
3600.0 nominal
-
Shaft Length
0.625 inches nominal
-
Tap Location Tolerance Per Section
-1.0/+1.0 deg angular rotation 2nd section
-
Function Conformity Per Section
all sections independent linearity
-
Undercut Width
0.0730 inches nominal
-
Pilot Length
0.0620 inches nominal
-
Actuator Type
single shaft
-
Effective Electrical Rotation In Deg Angular Rotation
3600.0 nominal
-
Reliability Indicator
not established
-
Pilot Diameter Runout
0.00200 inches
-
Function Conformity Tolerance Per Section
-0.25/+0.25 2nd section
-
Terminal Type And Quantity
15 tab, solder lug
-
Lateral Runout
0.003 inches
-
Body Length
4.125 inches maximum
-
Fixed Tap Quantity Per Section
9 2nd section
-
Mounting Lip Depth
0.0940 inches nominal
-
Terminal Location
radially positioned over less than half the circumference
-
Mounting Lip Diameter
1.9950 inches minimum and 2.0050 inches maximum
-
Shaft Runout
0.001 inches
-
Body Diameter
1.995 inches minimum and 2.005 inches maximum
-
Electrical Resistance Per Section
100.0 percent, rated amperes c and better industrial clears