A10W5K

Technical Characteristics

• Lateral Distance Between Mounting Hole Centers

  0.995 inches minimum and 1.005 inches maximum

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Overall Length

  1.328 inches nominal

• Mounting Facility Quantity

  2

• Standard Taper Curve Per Section

  a single section

• Shaft Length

  0.047 inches minimum and 0.078 inches maximum

• Mounting Method

  unthreaded hole

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  175.0 single section

• Test Data Document

  56232-1001531 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Hole Diameter

  0.091 inches minimum and 0.095 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Section Quantity

  1

• Overall Width

  0.205 inches minimum and 0.235 inches maximum

• Electrical Resistance Per Section

  5.0 kilohms single section

• Shaft Diameter

  0.010 inches nominal

• Actuator Travel Control Feature

  stops

• Terminal Location

  rear end

• Body Style

  rectangular w/mounting holes/slots

• Shaft Style

  round, slotted

• Terminal Type And Quantity

  3 tab w/wire lead

• Power Dissipation Rating Per Section In Watts

  0.8 free air single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Rotary Actuator Travel In Angular Deg

  9000.0 nominal

• Body Width

  0.205 inches minimum and 0.235 inches maximum

• Body Height

  0.297 inches minimum and 0.328 inches maximum

• Overall Height

  0.297 inches minimum and 0.328 inches maximum

• Body Length

  1.266 inches maximum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section