NL5713-1429-0

Technical Characteristics

• Power Dissipation Rating Per Section In Watts

  2.0 free air all sections

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 2nd section

• Overall Length

  5.183 inches nominal

• Terminal Type And Quantity

  26 turret

• Shaft Style

  round, slotted

• Actuator Type

  double ended shaft

• Function Characteristic Per Section

  all sections table

• Section Quantity

  7

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 3rd section

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 4th section

• Pilot Diameter

  2.8740 inches minimum and 2.8750 inches maximum

• Electrical Resistance Per Section

  5.0 kilohms all sections

• Shaft Diameter

  0.249 inches nominal

• Function Conformity Tolerance Per Section

  -1.00/+1.00 all sections

• Body Diameter

  3.000 inches nominal

• Shaft Runout

  0.001 inches

• Test Data Document

  10001-1472231 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Terminal Location

  radially positioned over less than half the circumference

• Undercut Diameter

  1.820 inches minimum and 2.825 inches maximum

• Mounting Method

  clamp ring

• Maximum Running Torque

  4.30 inch-ounces

• Actuator Travel Control Feature

  continuous motion

• Reliability Indicator

  not established

• Pilot Length

  0.0620 inches nominal

• Function Conformity Per Section

  all sections independent linearity

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Body Height

  3.256 inches nominal

• Mounting Lip Diameter

  3.0000 inches nominal

• Body Length

  4.433 inches maximum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 1st section

• Effective Electrical Rotation In Deg Angular Rotation

  357.0 minimum and 359.0 maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Body Style

  cylindrical servo mounted

• Fixed Tap Quantity Per Section

  1 all sections

• Undercut Width

  0.0730 inches minimum

• Mounting Lip Depth

  0.0930 inches nominal

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 7th section

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 6th section

• Shaft Length

  0.594 inches minimum and 0.656 inches maximum

• Maximum Starting Torque

  5.70 inch-ounces

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 5th section