200C399

Technical Characteristics

• Section Quantity

  2

• Pilot Diameter

  1.8745 inches minimum and 1.8750 inches maximum

• Shaft Bearing Type

  ball

• Function Characteristic Per Section

  all sections linear

• ~1

  cw

• Special Features

  in section one the 225.0 deg tap terminal connected to ccw terminal and 315.0 deg tap terminal connected to cw terminal to provide 18000 nom resistance,this resistor has two switches,the first from 295 deg to 350 deg cw,the second from 335 deg to 350 deg

• Terminal Type And Quantity

  16 tab, solder lug

• Switch Type

  rotary

• Fixed Tap Quantity Per Section

  3 1st section

• Features Provided

  nonmetallic shaft

• Maximum Running Torque

  2.40 inch-ounces

• Mounting Lip Depth

  0.0620 inches nominal

• Fixed Tap Quantity Per Section

  1 2nd section

• Maximum Starting Torque

  3.30 inch-ounces

• Electrical Resistance Per Section

  46.67 percent, rated amperes c and better finish

• Effective Electrical Rotation In Deg Angular Rotation

  350.0 nominal

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Shaft Style

  round

• Body Length

  2.783 inches maximum

• Shaft Diameter

  0.250 inches nominal

• Body Style

  cylindrical servo mounted

• Electrical Resistance Per Section

  20.0 percent, rated amperes c and better industrial clears

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  225.0 1st section

• Switch Operating Position

  end of rotation

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Function Conformity Per Section

  all sections independent linearity

• Pilot Length

  0.0620 inches nominal

• Undercut Width

  0.0620 inches nominal

• Actuator Type

  single shaft

• Power Dissipation Rating Per Section In Watts

  2.8 free air all sections

• Reliability Indicator

  not established

• Actuator Travel Control Feature

  continuous motion

• Mounting Method

  clamp ring

• Terminal Location

  radially positioned over less than half the circumference

• Function Conformity Tolerance Per Section

  -0.25/+0.25 all sections

• Undercut Diameter

  1.875 inches nominal

• Tap Location Tolerance Per Section

  -1.0/+1.0 ohms all sections

• Mounting Lip Diameter

  1.9750 inches minimum and 1.9950 inches maximum

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  315.0 2nd section

• Shaft Length

  0.735 inches minimum and 0.765 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  50.0 all sections

• Body Diameter

  1.975 inches minimum and 1.995 inches maximum