121-0547-2

Technical Characteristics

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Terminal Type And Quantity

  5 solder stud

• Special Features

  adjustible by screwdriver slot on rear end

• Function Characteristic Per Section

  single section linear

• Function Conformity Per Section

  single section independent linearity

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Function Conformity Tolerance Per Section

  m0.05/p0.05 single section

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  2700.0 1st section

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  1600.0 1st section

• Electrical Resistance Per Section

  7.78 kilohms single section

• Features Provided

  nonmetallic shaft

• Mounting Method

  clamp ring

• Pilot Diameter Runout

  0.001 inches

• Lateral Runout

  0.001 inches

• Shaft Runout

  0.001 inches

• Shaft End Play

  0.005 inches

• Maximum Stop Torque

  480.00 inch-ounces (ounce-inches)

• Actuator Type

  single shaft

• Shaft Diameter

  0.250 inches nominal

• Body Diameter

  2.000 inches maximum

• Undercut Diameter

  1.875 inches maximum

• Reliability Indicator

  not established

• Actuator Travel Control Feature

  stops

• Resistance Tolerance Per Section In Percent

  m5.0/p5.0 single section

• Tap Location Tolerance Per Section

  m1.0/p1.0 ohms single section

• Fixed Tap Quantity Per Section

  2 single section

• Rotary Actuator Travel In Angular Deg

  3510.0 nominal

• Terminal Location

  radially positioned over less than half the circumference

• Shaft Radial Play

  0.001 inches

• Maximum Starting Torque

  0.75 inch-ounces (ounce-inches)

• Effective Electrical Rotation In Deg Angular Rotation

  3500.0 nominal

• Shaft Bearing Type

  ball

• Mounting Lip Depth

  0.0880 inches minimum and 0.0980 inches maximum

• Mounting Lip Diameter

  1.9950 inches minimum and 2.0050 inches maximum

• Overall Diameter

  2.375 inches nominal

• Body Length

  2.344 inches maximum

• Shaft Length

  0.594 inches minimum and 0.656 inches maximum

• Undercut Width

  0.0730 inches minimum

• Overall Length

  2.969 inches nominal

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Pilot Diameter

  1.8740 inches minimum and 1.8750 inches maximum

• Section Quantity

  1