171-002-4711

Technical Characteristics

• Zero Power Resistance At Specified Temp

  427.7 ohms 2nd resistance-temperature point

• Thermal Time Constant In Seconds

  54.0

• Zero Power Temp Coefficient Of Resistance In Percent Per Deg Celsius

  0.70

• Zero Power Resistance

  470.000 ohms

• Resistance Tolerance At A Specified Temp In Percent

  -10.0/+10.0 all resistance-temperature points

• Temp Points For Resistance Readings At Zero Power

  70.0 deg celsius 4th resistance-temperature point

• Temp Points For Resistance Readings At Zero Power

  40.0 deg celsius 3rd resistance-temperature point

• Temp Points For Resistance Readings At Zero Power

  100.0 deg celsius 5th resistance-temperature point

• Inclosure Type

  encapsulated

• Reliability Indicator

  not established

• Terminal Type And Quantity

  2 wire lead

• Terminal Length

  1.500 inches nominal

• Style Designator

  rod

• Maximum Power Dissipation Rating

  250.00 milliwatts

• Terminal Diameter

  0.025 inches nominal

• Reference Temp In Deg Celsius

  25.0

• Body Length

  0.585 inches nominal

• Ambient Temp At Full Rated Power

  100.0 deg celsius

• Zero Power Resistance At Specified Temp

  658.0 ohms 4th resistance-temperature point

• Temp Points For Resistance Readings At Zero Power

  -10.0 deg celsius 2nd resistance-temperature point

• Zero Power Resistance At Specified Temp

  723.8 ohms 5th resistance-temperature point

• Maximum Operating Temp

  150.0 deg celsius

• Temp Points For Resistance Readings At Zero Power

  -50.0 deg celsius 1st resistance-temperature point

• Body Outside Diameter

  0.200 inches nominal

• Zero Power Resistance At Specified Temp

  258.5 ohms 1st resistance-temperature point

• Zero Power Resistance At Specified Temp

  578.1 ohms 3rd resistance-temperature point

• Zero Power Resistance Tolerance In Percent At Reference Temp

  -10.0/+10.0

• Test Data Document

  06845-c680370 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)