1807040-1

Technical Characteristics

• Undercut Width

  0.0520 inches minimum and 0.0720 inches maximum

• Screw Thread Quantity Per Inch

  32.0

• Body Diameter

  1.990 inches minimum and 2.010 inches maximum

• Terminal Location

  radially positioned over more than half the circumference

• Shaft Diameter

  0.2494 inches minimum and 0.2497 inches maximum

• Terminal Type And Quantity

  10 tab, solder lug

• Screw Thread Diameter

  0.164 inches nominal

• Fixed Tap Quantity Per Section

  2 2nd section

• Fixed Tap Quantity Per Section

  2 1st section

• Screw Thread Series Designator

  unc

• Reliability Indicator

  not established

• Function Conformity Per Section

  all sections independent linearity

• Function Conformity Tolerance Per Section

  -0.025/+0.025 all sections

• Actuator Travel Control Feature

  clutch

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Body Style

  cylindrical servo mounted

• Mounting Lip Diameter

  1.9900 inches minimum and 2.0100 inches maximum

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  287.0 2nd section and 287.0 1st section and 2844.0 2nd section

• Effective Electrical Rotation In Deg Angular Rotation

  3595.0 minimum and 3605.0 maximum

• Mounting Lip Depth

  0.0520 inches minimum and 0.0720 inches maximum

• Shaft Style

  round

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  2844.0 1st section

• Special Features

  four fixed wirewound resistors attached to back of item

• Mounting Hole/Stud Circle Diameter

  0.927 inches minimum and 0.947 inches maximum

• Rotary Actuator Travel In Angular Deg

  3595.0 minimum and 3605.0 maximum

• Pilot Diameter

  0.7490 inches minimum and 0.7500 inches maximum

• Shaft Bearing Type

  bearing

• Pilot Length

  0.0520 inches minimum and 0.0720 inches maximum

• Body Length

  3.904 inches maximum

• Function Characteristic Per Section

  all sections linear

• Electrical Resistance Per Section

  10.0 kilohms all sections

• Power Dissipation Rating Per Section In Watts

  5.0 free air all sections

• Section Quantity

  2

• Undercut Diameter

  1.8740 inches minimum and 1.8750 inches maximum

• Mounting Method

  clamp ring and threaded hole

• Shaft Length

  0.595 inches minimum and 0.655 inches maximum