5513-186-0

Technical Characteristics

• Maximum Running Torque

  1.30 inch-ounces

• Mounting Method

  threaded hole

• Shaft Length

  0.875 inches nominal

• Fixed Tap Quantity Per Section

  2 2nd section

• Fixed Tap Quantity Per Section

  2 3rd section

• Fixed Tap Quantity Per Section

  2 4th section

• Screw Thread Diameter

  0.164 inches nominal

• Pilot Diameter

  1.5610 inches minimum and 1.5620 inches maximum

• Screw Thread Quantity Per Inch

  32.0

• Terminal Type And Quantity

  21 tab, solder lug

• Body Length

  2.562 inches maximum

• Electrical Resistance Per Section

  25.000 percent, rated amperes c and better industrial clears

• Maximum Starting Torque

  1.90 inch-ounces

• Actuator Type

  double ended shaft

• Section Quantity

  4

• Electrical Resistance Per Section

  25.000 percent, rated amperes c and better select

• Test Data Document

  10001-1088621 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Terminal Location

  radially positioned over less than half the circumference

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  340.0 1st section and 0.0 1st section and 354.0 1st section

• Power Dissipation Rating Per Section In Watts

  4.5 free air all sections

• Function Conformity Per Section

  all sections proportional conformity

• Actuator Travel Control Feature

  continuous motion

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  105.0 all sections

• Screw Thread Series Designator

  unc

• Reliability Indicator

  not established

• Mounting Hole/Stud Circle Diameter

  1.500 inches nominal

• Undercut Width

  0.0730 inches nominal

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Electrical Resistance Per Section

  20.000 percent, rated amperes c and better finish

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 all sections

• Body Style

  cylindrical servo mounted

• Shaft Diameter

  0.250 inches nominal

• Function Conformity Tolerance Per Section

  -0.75/+0.75 all sections

• Mounting Facility Quantity

  3

• Mounting Lip Diameter

  1.7400 inches minimum and 1.7500 inches maximum

• Shaft Style

  round

• Body Diameter

  1.740 inches minimum and 1.750 inches maximum

• Angle Of Mounting Hole In Deg

  120.0

• Undercut Diameter

  1.561 inches minimum and 1.562 inches maximum

• Angle Between Centerlines Of Mounting Holes In Deg

  60.0

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  0.0 4th section and 340.0 3rd section

• Electrical Resistance Per Section

  10.000 percent, rated amperes c and better v.g. stepping

• Mounting Lip Depth

  0.0620 inches nominal

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  0.0 3rd section and 340.0 3rd section

• Pilot Length

  0.6200 inches nominal

• Features Provided

  nonmetallic shaft

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  0.0 2nd section and 340.0 2nd section

• Fixed Tap Quantity Per Section

  3 1st section

• Function Characteristic Per Section

  all sections table