5613-5-0

Technical Characteristics

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Overall Length

  3.859 inches maximum

• Shaft Length

  0.547 inches minimum and 0.578 inches maximum

• Mounting Lip Depth

  0.0880 inches minimum and 0.0980 inches maximum

• Switch Type

  rotary

• Actuator Type

  single shaft

• Maximum Starting Torque

  3.00 inch-ounces (ounce-inches)

• Maximum Running Torque

  2.25 inch-ounces (ounce-inches)

• Lateral Runout

  0.002 inches

• Switch Operating Position

  start of rotation

• Terminal Location

  radially positioned over more than half the circumference

• Mounting Method

  clamp ring

• Electrical Resistance Per Section

  20.000 kilohms all sections

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Function Conformity Tolerance Per Section

  m0.20/p0.20 all sections

• Tap Location Tolerance Per Section

  m0.5/p0.5 ohms all sections

• Actuator Travel Control Feature

  continuous motion

• Tap Location From Ccw Terminal Per Section In Ohms

  10000.0 all sections

• Switch Current Type And Rating In Amps

  3.000 ac

• Section Quantity

  2

• Reliability Indicator

  not established

• Pilot Diameter

  1.8740 inches minimum and 1.8750 inches maximum

• Undercut Diameter

  1.874 inches minimum and 1.875 inches maximum

• Undercut Width

  0.0730 inches minimum

• Body Diameter

  2.000 inches maximum

• Shaft Diameter

  0.250 inches maximum

• Body Length

  3.281 inches maximum

• Overall Diameter

  2.734 inches maximum

• Mounting Lip Diameter

  1.9950 inches minimum and 2.0050 inches maximum

• Shaft Bearing Type

  ball

• Switch Voltage Rating In Volts

  125.0

• Effective Electrical Rotation In Deg Angular Rotation

  355.0 nominal

• Shaft Runout

  0.001 inches

• Pilot Diameter Runout

  0.00200 inches

• Switch Contact Arrangement

  single pole,single throw,normally open,both positions maintained

• Features Provided

  switch

• Power Dissipation Rating Per Section In Watts

  3.5 free air all sections

• Function Conformity Per Section

  all sections terminal base linearity

• Fixed Tap Quantity Per Section

  1 all sections

• Resistance Tolerance Per Section In Percent

  m5.0/p5.0 all sections

• Function Characteristic Per Section

  all sections linear

• Terminal Type And Quantity

  10 tab,solder lug