MD20-10-1172

Technical Characteristics

• Section Quantity

  1

• Reliability Indicator

  not established

• Pilot Diameter

  1.8750 inches nominal

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Shaft Length

  0.500 inches nominal

• Body Length

  2.750 inches maximum

• Overall Diameter

  1.995 inches minimum and 2.005 inches maximum

• Mounting Lip Depth

  0.0880 inches minimum and 0.0980 inches maximum

• Actuator Type

  single shaft

• Maximum Running Torque

  1.00 inch-ounces (ounce-inches)

• Shaft End Play

  0.00500 inches

• Lateral Runout

  0.002 inches

• Shaft Radial Play

  0.001 inches

• Terminal Location

  radially positioned over less than half the circumference

• Mounting Method

  clamp ring

• Features Provided

  nonmetallic shaft

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  720.0 single section and 2880.0 single section

• Function Conformity Tolerance Per Section

  m0.05/p0.05 single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 single section

• Fixed Tap Quantity Per Section

  2 single section

• Actuator Travel Control Feature

  stops

• Function Characteristic Per Section

  single section linear

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  m20.0/p20.0 single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Terminal Type And Quantity

  3 tab,solder lug

• Resistance Tolerance Per Section In Percent

  m5.0/p5.0 single section

• Tap Location Tolerance Per Section

  m3.5/p3.0 deg angular rotation single section

• Function Conformity Per Section

  single section independent linearity

• Power Dissipation Rating Per Section In Watts

  5.0 free air single section

• Rotary Actuator Travel In Angular Deg

  3620.0 minimum

• Electrical Resistance Per Section

  5.000 kilohms single section

• Pilot Diameter Runout

  0.00200 inches

• Shaft Runout

  0.001 inches

• Maximum Stop Torque

  5.90 inch-ounces (ounce-inches)

• Maximum Starting Torque

  1.30 inch-ounces (ounce-inches)

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Contact Arm Electrical Off Position

  fully ccw-cw

• Shaft Bearing Type

  ball

• Mounting Lip Diameter

  1.9950 inches minimum and 2.0050 inches maximum

• Shaft Diameter

  0.250 inches nominal

• Body Diameter

  2.000 inches nominal

• Undercut Width

  0.0730 inches minimum

• Undercut Diameter

  1.875 inches maximum

• Overall Length

  3.312 inches nominal