209L1-152

Technical Characteristics

• Section Quantity

  2

• Overall Height

  0.296 inches minimum and 0.328 inches maximum

• Overall Width

  0.484 inches minimum and 0.516 inches maximum

• Mounting Hole Diameter

  0.086 inches nominal

• Shaft Diameter

  0.109 inches minimum and 0.141 inches maximum

• Body Width

  0.484 inches minimum and 0.516 inches maximum

• Body Height

  0.296 inches minimum and 0.328 inches maximum

• Actuator Type

  single shaft

• Maximum Starting Torque

  7.50 inch-ounces (ounce-inches)

• Maximum Stop Torque

  20.00 inch-ounces (ounce-inches)

• Lateral Distance Between Mounting Hole Centers

  1.005 inches nominal

• Terminal Location

  rear-bottom

• Mounting Method

  unthreaded hole

• Electrical Resistance Per Section

  1.500 kilohms 2nd section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  105.0 single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  m50.0/p50.0 single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Standard Taper Curve Per Section

  a 2nd section

• Overall Length

  1.234 inches minimum and 1.266 inches maximum

• Terminal Length

  11.500 inches minimum and 11.516 inches maximum

• Shaft Length

  0.063 inches nominal

• Body Length

  1.234 inches minimum and 1.266 inches maximum

• Mounting Facility Quantity

  2

• Electrical Resistance Per Section

  1.500 kilohms 1st section

• Rotary Actuator Travel In Angular Deg

  9000.0 nominal

• Power Dissipation Rating Per Section In Watts

  0.25 free air all sections

• Resistance Tolerance Per Section In Percent

  m10.0/p10.0 all sections

• Actuator Travel Control Feature

  continuous motion

• Standard Taper Curve Per Section

  a 1st section

• Test Data Document

  58189-810001-331 drawing

• Terminal Type And Quantity

  6 wire lead