AP1-1-8-220

Technical Characteristics

• Mounting Method

  standard bushing

• Section Quantity

  1

• Effective Electrical Rotation In Deg Angular Rotation

  315.0 nominal

• Body Length

  1.000 inches maximum

• Screw Thread Quantity Per Inch

  32.0

• Actuator Travel Control Feature

  stops

• Undercut Diameter

  0.213 inches minimum and 0.223 inches maximum

• Maximum Stop Torque

  128.00 inch-ounces

• Overall Length

  2.187 inches nominal

• Shaft Diameter

  0.248 inches minimum and 0.250 inches maximum

• Shaft Length

  0.797 inches minimum and 0.828 inches maximum

• Body Style

  cylindrical bushing mounted

• Test Data Document

  35351-128666 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Power Dissipation Rating Per Section In Watts

  0.5 free air single section

• Rotary Actuator Travel In Angular Deg

  325.0 minimum

• Maximum Starting Torque

  9.00 inch-ounces

• Nonturn Device Radius

  0.422 inches minimum and 0.453 inches maximum

• Screw Thread Diameter

  0.375 inches nominal

• Undercut Length

  0.281 inches nominal

• Electrical Resistance Per Section

  10.000 kilohms single section

• Terminal Type And Quantity

  3 tab, solder lug

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Body Diameter

  1.312 inches maximum

• Nonturn Device Location

  nonturn device 168 deg cw from 12 oclock

• Mounting Bushing Length

  0.234 inches minimum and 0.266 inches maximum

• Shaft Style

  round, undercut

• Overall Diameter

  1.312 inches maximum

• Terminal Location

  terminals can be located on rear or top of resistor

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef