RV3-8S190C

Technical Characteristics

• Contact Arm Electrical Off Position

  fully ccw-cw

• Effective Electrical Rotation In Deg Angular Rotation

  315.0 nominal

• Maximum Stop Torque

  0.60 inch-ounces (ounce-inches)

• Shaft End Play

  0.00100 inches

• Shaft Runout

  0.001 inches

• Lateral Runout

  0.001 inches

• Pilot Diameter Runout

  0.00200 inches

• Electrical Resistance Per Section

  10.000 kilohms all sections

• Function Conformity Tolerance Per Section

  -0.50 to 0.50 all sections

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  80.0 all sections

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -20.0 to 20.0 all sections

• Power Dissipation Rating Per Section In Watts

  8.0 free air all sections

• Function Conformity Per Section

  all sections independent linearity

• Actuator Travel Control Feature

  continuous motion

• Function Characteristic Per Section

  all sections linear

• Terminal Type And Quantity

  6 turret

• Mounting Method

  clamp ring

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Resistance Tolerance Per Section In Percent

  -5.0 to 5.0 all sections

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  25.0 all sections

• Terminal Location

  radially positioned over less than half the circumference

• Shaft Radial Play

  0.001 inches

• Maximum Starting Torque

  0.60 inch-ounces (ounce-inches)

• Actuator Type

  single shaft

• Shaft Bearing Type

  bearing

• Shaft Style

  1c round

• Mounting Hole/Stud Circle Diameter

  0.750 inches nominal

• Mounting Lip Depth

  0.0730 inches nominal

• Mounting Lip Diameter

  1.8750 inches nominal

• Body Length

  0.974 inches nominal

• Shaft Diameter

  0.250 inches nominal

• Body Diameter

  3.000 inches nominal

• Undercut Diameter

  1.870 inches nominal

• Pilot Diameter

  0.7500 inches nominal

• Reliability Indicator

  not established

• Body Style

  4b cylindrical servo mounted

• Section Quantity

  2

• Shaft Length

  1.125 inches nominal

• Angle Between Centerlines Of Mounting Holes In Deg

  120.0

• Angle Of Mounting Hole In Deg

  30.0

• Undercut Width

  0.0780 inches nominal

• Pilot Length

  0.0610 inches nominal