2469912PC1

Technical Characteristics

• Shaft Length

  0.531 inches minimum and 0.593 inches maximum

• Electrical Resistance Per Section

  5.0 kilohms single section

• Tap Location Tolerance Per Section

  -0.5/+0.5 ohms single section

• Section Quantity

  1

• Maximum Starting Torque

  1.50 inch-ounces

• Maximum Stop Torque

  80.00 inch-ounces

• Mounting Lip Diameter

  0.8500 inches minimum and 0.8900 inches maximum

• Function Characteristic Per Section

  single section linear

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Terminal Location

  radially positioned over less than half the circumference

• Overall Diameter

  0.995 inches nominal

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -40.0/+40.0 single section

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Tap Location From Ccw Terminal Per Section In Ohms

  4000.0 single section

• Mounting Method

  clamp ring

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Reliability Indicator

  not established

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Actuator Type

  single shaft

• Terminal Type And Quantity

  4 solder stud

• Overall Length

  2.425 inches nominal

• Fixed Tap Quantity Per Section

  1 single section

• Body Style

  cylindrical servo mounted

• Undercut Diameter

  0.745 inches minimum and 0.755 inches maximum

• Function Conformity Tolerance Per Section

  -0.05/+0.05 single section

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  2160.0 single section

• Shaft Style

  round

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Rotary Actuator Travel In Angular Deg

  3700.0 nominal

• Undercut Width

  0.0570 inches minimum and 0.0670 inches maximum

• Body Diameter

  0.850 inches minimum and 0.890 inches maximum

• Features Provided

  nonmetallic shaft

• Function Conformity Per Section

  single section independent linearity

• Body Length

  1.863 inches maximum

• Pilot Diameter

  0.6240 inches minimum and 0.6250 inches maximum

• Shaft Diameter

  125.000 inches maximum

• Shaft Bearing Type

  ball

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Fragility Factor

  moderately rugged

• Actuator Travel Control Feature

  stops