2XAN17-51

Technical Characteristics

• Body Style

  1c multipole-multiple actuator type

• Bushing Length

  0.146 inches minimum and 0.166 inches maximum

• Body Width

  1.510 inches minimum and 1.530 inches maximum

• Case Material

  plastic

• Center To Center Distance Between Terminals Parallel To Length

  1.180 inches minimum and 1.200 inches maximum

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

  0.740 inches minimum and 0.760 inches maximum

• Fragility Factor

  moderately rugged

• Pole Quantity

  2

• Arc Quenching Method

  magnetic blowout

• Mounting Facility Type And Quantity

  4 threaded hole

• Thread Quantity Per Inch

  32

• Maximum Continuous Load Current Rating Per Pole

  25.0 amperes ac all locations

• Operating Voltage Type And Rating Per Pole In Volts

  115.0 ac all locations

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  3500.0 ac all locations

• Circuit Protection Type

  overcurrent all locations

• Trip Release Method

  magnetic-hydraulic all locations

• Trip Release Characteristic

  time delay all locations

• Main Contact Tripping Mechanism Type

  trip free

• Manual Actuator Type And Quantity

  2 toggle

• External Actuator Linkage Arrangement

  one and two linked

• Internal Trip Release Configuration

  series trip all locations

• Trip Delay Time In Seconds Per Rated Continuous Current

  0.300 minimum at 200 pct all locations and 1.000 maximum at 200 pct

• Inclosure Protection Type For Which Designed

  dustproof and fungus proof

• Storage Type

  general purpose warehouse

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  125.0 all locations

• Reset Method

  manual

• Actuator Function

  trip-reset

• Actuator Position Designation

  at each pole

• Nominal Thread Size

  0.138 inches

• Frequency In Hertz

  400.0 all locations

• Thread Series Designator

  unc

• Terminal Type And Quantity

  4 tab w/screw

• Body Length

  2.490 inches minimum and 2.510 inches maximum

• Center To Center Distance Between Terminals Parallel To Width

  0.740 inches minimum and 0.760 inches maximum

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

  1.802 inches minimum and 1.822 inches maximum

• Mounting Surface To Terminal End Distance

  1.990 inches minimum and 2.010 inches maximum