32A1-1212-50K

Technical Characteristics

• Shaft End Play

  0.00450 inches

• Effective Electrical Rotation In Deg Angular Rotation

  305.0 nominal

• Shaft Length

  0.688 inches nominal

• Overall Length

  1.875 inches nominal

• Shaft Bearing Type

  ball

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Function Conformity Per Section

  single section independent linearity

• Mounting Lip Depth

  0.0620 inches nominal

• Body Diameter

  1.875 inches nominal

• Overall Diameter

  2.000 inches nominal

• Body Length

  1.187 inches nominal

• Pilot Diameter

  0.9688 inches nominal

• Power Dissipation Rating Per Section In Watts

  6.0 free air single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Shaft Style

  round

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Shaft Diameter

  0.250 inches nominal

• Body Style

  cylindrical servo mounted

• Maximum Starting Torque

  1.00 inch-ounces

• Maximum Running Torque

  1.00 inch-ounces

• Pilot Diameter Runout

  0.00150 inches

• Shaft Radial Play

  0.002 inches

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Lateral Runout

  0.002 inches

• Terminal Type And Quantity

  3 solder stud

• Pilot Length

  0.0620 inches nominal

• Undercut Width

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Undercut Diameter

  1.688 inches nominal

• Actuator Travel Control Feature

  continuous motion

• Electrical Resistance Per Section

  50.000 kilohms single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Mounting Method

  clamp ring

• Terminal Location

  radially positioned over less than half the circumference

• Features Provided

  humidity proof

• Function Characteristic Per Section

  single section linear

• Function Conformity Tolerance Per Section

  -1.00/+1.00 single section

• Test Data Document

  01413-163746-001 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Section Quantity

  1

• Shaft Runout

  0.002 inches

• Mounting Lip Diameter

  1.8750 inches nominal