H060

Technical Characteristics

• Reliability Indicator

  not established

• Electrical Resistance Per Section

  20.0 percent, rated amperes c drop siding

• Shaft Style

  round, flatted

• Electrical Resistance Per Section

  7.5 percent, rated amperes c and better industrial clears

• Terminal Type And Quantity

  30 turret

• Electrical Resistance Per Section

  20.0 percent, rated amperes c finish

• Mounting Method

  clamp ring

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 all sections

• Electrical Resistance Per Section

  40.0 percent, rated amperes c and better select

• Function Conformity Tolerance Per Section

  -1.00/+1.00 2nd section

• Electrical Resistance Per Section

  7.5 percent, rated amperes c and better v.g. stepping

• First Flat Length

  0.377 inches nominal

• Function Conformity Tolerance Per Section

  -1.00/+1.00 4th section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  25.0 all sections

• Power Dissipation Rating Per Section In Watts

  1.0 free air all sections

• Electrical Resistance Per Section

  10.0 percent, rated amperes c and better finish

• Undercut Width

  0.0570 inches minimum

• Terminal Location

  radially positioned over more than half the circumference

• Shaft Length

  0.437 inches nominal

• Test Data Document

  97942-577r900 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Function Characteristic Per Section

  all sections equation

• Function Conformity Tolerance Per Section

  -2.00/+2.00 7th section

• Electrical Resistance Per Section

  2.0 percent, rated amperes c flooring

• Function Conformity Tolerance Per Section

  -0.65/+0.65 3rd section

• Undercut Diameter

  0.969 inches maximum

• Section Quantity

  7

• Mounting Lip Depth

  0.0620 inches nominal

• Actuator Type

  single shaft

• Pilot Length

  0.0620 inches nominal

• Flat Height

  0.104 inches minimum and 0.106 inches maximum

• Function Conformity Tolerance Per Section

  -0.25/+0.25 1st section

• Shaft Diameter

  0.1242 inches minimum and 0.1247 inches maximum

• Function Conformity Tolerance Per Section

  -1.50/+1.50 6th section

• Body Length

  1.880 inches nominal

• Function Conformity Tolerance Per Section

  -1.50/+1.50 5th section

• Body Style

  cylindrical servo mounted

• Function Conformity Per Section

  all sections absolute conformity

• Body Diameter

  1.062 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 all sections

• Mounting Lip Diameter

  1.0620 inches nominal

• Pilot Diameter

  0.9688 inches maximum