301-60H25K

Technical Characteristics

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  50.0 single section

• Body Length

  0.490 inches minimum and 0.510 inches maximum

• Body Height

  0.490 inches minimum and 0.510 inches maximum

• Section Quantity

  1

• Maximum Starting Torque

  7.50 inch-ounces

• Center To Center Distance Between Terminal Rows

  0.100 inches nominal

• Terminal Type And Quantity

  3 pin

• Mounting Hole Diameter

  0.070 inches minimum and 0.073 inches maximum

• Mounting Method

  unthreaded hole

• Standard Taper Curve Per Section

  a single section

• Mounting Facility Quantity

  2

• Terminal Length

  0.170 inches minimum and 0.210 inches maximum

• Reliability Indicator

  not established

• Actuator Type

  single shaft

• Special Features

  o-ring seal around shaft required. device may be silicone filled

• Electrical Resistance Per Section

  25.0 kilohms single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -70.0/+70.0 single section

• Overall Length

  0.490 inches minimum and 0.510 inches maximum

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.095 inches minimum and 0.105 inches maximum

• Overall Width

  0.445 inches nominal

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Body Style

  rectangular w/mounting holes

• Rotary Actuator Travel In Angular Deg

  900.0 nominal

• Body Width

  0.250 inches minimum and 0.265 inches maximum

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Actuator Travel Control Feature

  stops

• Shaft Style

  round

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Shaft Length

  0.058 inches minimum and 0.085 inches maximum

• Overall Height

  0.490 inches minimum and 0.510 inches maximum

• Terminal Location

  left adjacent side single row

• Lateral Distance Between Mounting Hole Centers

  0.522 inches nominal

• Center To Center Distance Between Terminals

  0.200 inches nominal

• Shaft Diameter

  0.092 inches minimum and 0.097 inches maximum