751-6164

Technical Characteristics

• Section Quantity

  2

• Reliability Indicator

  not established

• Pilot Diameter

  0.7495 inches minimum and 0.7505 inches maximum

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Undercut Width

  0.0570 inches minimum

• Resistance Tolerance Per Section In Percent

  -5.0 to 5.0 2nd section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Standard Taper Curve Per Section

  a all sections

• Terminal Type And Quantity

  6 solder stud

• Body Diameter

  1.062 inches maximum

• Shaft Diameter

  0.124 inches nominal

• Shaft Length

  0.469 inches minimum and 0.531 inches maximum

• Body Length

  1.346 inches maximum

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Shaft Style

  1c round

• Actuator Type

  single shaft

• Maximum Starting Torque

  0.50 inch-ounces (ounce-inches)

• Maximum Running Torque

  0.50 inch-ounces (ounce-inches)

• Shaft End Play

  0.005 inches

• Shaft Runout

  0.002 inches

• Shaft Radial Play

  0.001 inches

• Terminal Location

  radially positioned over less than half the circumference

• Electrical Resistance Per Section

  500.0 ohms all sections

• Fixed Tap Quantity Per Section

  2 all sections

• Actuator Travel Control Feature

  continuous motion

• Body Style

  5b cylindrical servo mounted

• Overall Length

  1.912 inches nominal

• Undercut Diameter

  0.781 inches maximum

• Overall Diameter

  1.187 inches maximum

• Mounting Lip Diameter

  0.8700 inches minimum and 0.8800 inches maximum

• Shaft Bearing Type

  ball

• Effective Electrical Rotation In Deg Angular Rotation

  360.0 nominal

• Lateral Runout

  0.002 inches

• Pilot Diameter Runout

  0.001 inches

• Mounting Method

  clamp ring

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  105.0 all sections

• Power Dissipation Rating Per Section In Watts

  0.8 free air all sections

• Tap Location Tolerance Per Section

  -1.0 to 1.0 ohms 1st section

• Tap Location Tolerance Per Section

  -2.0 to 2.0 ohms 2nd section