259689

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Shaft End Play

  0.005 inches

• Section Quantity

  2

• Power Dissipation Rating Per Section In Watts

  5.0 free air all sections

• Shaft Bearing Type

  ball

• Electrical Resistance Per Section

  10.0 kilohms all sections

• Function Characteristic Per Section

  all sections linear

• Overall Length

  4.986 inches nominal

• Features Provided

  nonmetallic shaft

• Undercut Width

  any acceptable

• Maximum Starting Torque

  2.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 all sections

• Mounting Lip Diameter

  2.0000 inches nominal

• Mounting Hole/Stud Circle Diameter

  1.250 inches nominal

• Function Conformity Tolerance Per Section

  -0.05/+0.05 2nd section

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Pilot Diameter Runout

  0.001 inches

• Shaft Style

  round

• Mounting Lip Depth

  0.0930 inches nominal

• Mounting Facility Quantity

  3

• Undercut Diameter

  1.812 inches nominal

• Shaft Diameter

  0.250 inches nominal

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Function Conformity Tolerance Per Section

  -0.025/+0.025 1st section

• Terminal Type And Quantity

  8 solder stud

• Overall Diameter

  2.300 inches nominal

• Function Conformity Per Section

  all sections independent linearity

• Mounting Hole Diameter

  0.164 inches nominal

• Pilot Length

  0.0620 inches nominal

• Maximum Stop Torque

  480.00 inch-ounces

• Actuator Type

  single shaft

• Angle Of Mounting Hole In Deg

  60.0

• Reliability Indicator

  not established

• Pilot Diameter

  1.8740 inches minimum and 1.8750 inches maximum

• Body Length

  4.048 inches maximum

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -25.0/+25.0 all sections

• Rotary Actuator Travel In Angular Deg

  3780.0 nominal

• Terminal Location

  radially positioned over less than half the circumference

• Fixed Tap Quantity Per Section

  2 1st section

• Mounting Method

  unthreaded hole

• Body Diameter

  1.825 inches maximum

• Shaft Runout

  0.001 inches

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 minimum

• Shaft Length

  0.906 inches minimum and 0.969 inches maximum

• Maximum Running Torque

  1.50 inch-ounces

• Angle Between Centerlines Of Mounting Holes In Deg

  120.0