500-5025

Technical Characteristics

• Overall Length

  2.073 inches nominal

• Shaft Length

  0.483 inches minimum and 0.517 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  359.0 minimum and 360.0 maximum

• Contact Arm Electrical Off Position

  fully cw

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Overall Diameter

  1.083 inches maximum

• Maximum Stop Torque

  130.00 inch-ounces

• Undercut Width

  0.0630 inches minimum and 0.0700 inches maximum

• Electrical Resistance Per Section

  10.0 kilohms single section

• Function Conformity Per Section

  single section independent linearity

• Mounting Lip Diameter

  0.8650 inches minimum and 0.8750 inches maximum

• Body Diameter

  0.880 inches maximum

• Rotary Actuator Travel In Angular Deg

  3600.0 minimum and 3630.0 maximum

• Terminal Location

  lower adjacent side single row

• Mechanical Backlash In Deg Angular Rotation

  0.1

• Shaft Style

  round

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 single section

• Shaft Diameter

  0.250 inches nominal

• Function Conformity Tolerance Per Section

  -0.05/+0.05 single section

• Body Style

  cylindrical servo mounted

• Fixed Tap Quantity Per Section

  1 single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Pilot Diameter

  0.6250 inches minimum and 0.6260 inches maximum

• Actuator Travel Control Feature

  clutch

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Terminal Type And Quantity

  3 solder stud

• Actuator Type

  single shaft

• Shaft End Play

  0.002 inches

• Reliability Indicator

  not established

• Mounting Lip Depth

  0.0570 inches minimum and 0.0620 inches maximum

• Maximum Running Torque

  0.30 inch-ounces

• Mounting Method

  clamp ring

• Maximum Starting Torque

  0.40 inch-ounces

• Tap Location From Ccw Terminal Per Section In Ohms

  5000.0 single section

• Pilot Length

  0.0570 inches minimum and 0.0620 inches maximum

• Function Characteristic Per Section

  single section linear

• Test Data Document

  10001-2075046 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Section Quantity

  1

• Body Length

  1.573 inches nominal

• Undercut Diameter

  0.865 inches minimum and 0.875 inches maximum