751-6554

Technical Characteristics

• Function Conformity Tolerance Per Section

  -1.00/+1.00 single section

• Undercut Width

  0.0570 inches minimum

• Section Quantity

  1

• Fragility Factor

  moderately rugged

• Shaft End Play

  0.005 inches

• Terminal Location

  rear end

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -400.0/+400.0 single section

• Function Conformity Per Section

  single section absolute linearity

• Body Length

  0.570 inches maximum

• Mounting Lip Diameter

  0.8750 inches nominal

• Effective Electrical Rotation In Deg Angular Rotation

  130.0 nominal

• Shaft Bearing Type

  bearing

• Mounting Lip Depth

  0.0620 inches nominal

• Shaft Diameter

  0.1243 inches minimum and 0.1249 inches maximum

• Electrical Resistance Per Section

  1.0 kilohms single section

• Undercut Diameter

  0.781 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Pilot Diameter Runout

  0.001 inches

• Shaft Style

  round

• Pilot Diameter

  0.7500 inches nominal

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Fixed Tap Quantity Per Section

  1 single section

• Test Data Document

  97942-577r573 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Tap Location From Ccw Terminal Per Section In Ohms

  500.0 single section

• Shaft Radial Play

  0.002 inches

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Power Dissipation Rating Per Section In Watts

  0.3 free air single section

• Pilot Length

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Shaft Length

  0.410 inches nominal

• Actuator Travel Control Feature

  continuous motion

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Mounting Method

  clamp ring

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Shaft Runout

  0.001 inches

• Function Characteristic Per Section

  single section linear

• Body Diameter

  0.875 inches nominal

• Tap Location Tolerance Per Section

  -5.0/+5.0 ohms single section

• Terminal Type And Quantity

  4 turret