3065P-1-500

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Center To Center Distance Between Terminals

  0.470 inches minimum and 0.530 inches maximum

• Body Height

  0.310 inches nominal

• Body Length

  0.985 inches minimum and 1.015 inches maximum

• Body Style

  rectangular w/mounting holes/slots

• Shaft Style

  round, slotted

• Power Dissipation Rating Per Section In Watts

  0.5 free air single section

• Features Provided

  nonmetallic shaft

• Shaft Length

  0.045 inches minimum and 0.075 inches maximum

• Body Width

  0.250 inches minimum and 0.310 inches maximum

• Shaft Diameter

  0.070 inches minimum and 0.130 inches maximum

• Terminal Location

  lower adjacent side single row

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 single section

• Mounting Method

  unthreaded hole

• Terminal Type And Quantity

  3 pin

• Center To Center Distance Between Terminal Rows

  0.200 inches nominal

• Test Data Document

  18876-202 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Lateral Distance Between Mounting Hole Centers

  0.825 inches minimum and 0.835 inches maximum

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -320.0/+320.0 single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  25.0 single section

• Overall Length

  1.030 inches minimum and 1.090 inches maximum

• Section Quantity

  1

• Maximum Starting Torque

  8.00 inch-ounces

• Terminal Length

  0.250 inches nominal

• Electrical Resistance Per Section

  50.000 ohms single section

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.200 inches nominal

• Overall Height

  0.560 inches nominal

• Rotary Actuator Travel In Angular Deg

  5400.0 nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Mounting Facility Quantity

  2

• Mounting Hole Diameter

  0.088 inches minimum

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Overall Width

  0.250 inches minimum and 0.310 inches maximum