6049157

Technical Characteristics

• Undercut Diameter

  0.970 inches minimum and 0.980 inches maximum

• Undercut Width

  0.0570 inches minimum and 0.0670 inches maximum

• Overall Diameter

  1.320 inches nominal

• Function Conformity Tolerance Per Section

  -0.75/+0.75 2nd section

• Power Dissipation Rating Per Section In Watts

  0.25 free air all sections

• Pilot Diameter

  0.9995 inches minimum and 1.0005 inches maximum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Function Conformity Tolerance Per Section

  -0.75/+0.75 3rd section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  80.0 all sections

• Function Conformity Per Section

  1st section terminal base linearity

• Fixed Tap Quantity Per Section

  1 all sections

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -85.0/+85.0 all sections

• Shaft Radial Play

  0.001 inches

• Electrical Resistance Per Section

  10.000 percent, rated amperes c and better finish

• Maximum Running Torque

  0.60 inch-ounces

• Err Default

  err default

• Tap Location From Ccw Terminal Per Section In Ohms

  1000.0 2nd section

• Shaft End Play

  0.00500 inches

• Shaft Bearing Type

  ball

• Function Characteristic Per Section

  all sections linear

• Section Quantity

  3

• Function Conformity Per Section

  3rd section independent linearity

• Electrical Resistance Per Section

  2.000 percent, rated amperes c and better industrial clears

• Electrical Resistance Per Section

  10.000 percent, rated amperes c and better select

• Effective Electrical Rotation In Deg Angular Rotation

  352.0 nominal

• Special Features

  0.437 in. min. fullspline on shaft

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Pilot Diameter Runout

  0.00100 inches

• Maximum Starting Torque

  1.00 inch-ounces

• Shaft Style

  round, threaded

• Shaft Diameter

  0.125 inches nominal

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Tap Location From Ccw Terminal Per Section In Ohms

  5000.0 1st section

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Overall Length

  2.605 inches nominal

• Actuator Travel Control Feature

  continuous motion

• Function Conformity Tolerance Per Section

  -1.00/+0.10 1st section

• Body Length

  2.000 inches maximum

• Tap Location From Ccw Terminal Per Section In Ohms

  5000.0 3rd section

• Mounting Method

  clamp ring

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Function Conformity Per Section

  2nd section independent linearity

• Terminal Location

  radially positioned over less than half the circumference

• Body Diameter

  1.000 inches nominal

• Shaft Length

  0.454 inches minimum and 0.565 inches maximum

• Shaft Runout

  0.001 inches

• Pilot Length

  0.0680 inches minimum and 0.0880 inches maximum

• Terminal Type And Quantity

  12 solder stud

• Tap Location Tolerance Per Section

  -100.0/+100.0 ohms all sections

• Mounting Lip Diameter

  1.0570 inches minimum and 1.0670 inches maximum