227881-1

Technical Characteristics

• Mounting Hole/Stud Circle Diameter

  0.436 inches minimum and 0.438 inches maximum

• Angle Between Centerlines Of Mounting Holes In Deg

  120.0

• Section Quantity

  1

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -650.0/+650.0 single section

• Shaft Length

  0.500 inches nominal

• Function Characteristic Per Section

  single section linear

• Resistance Tolerance Per Section In Percent

  -3.0/+7.0 single section

• Mounting Method

  threaded hole

• Body Diameter

  1.057 inches minimum and 1.067 inches maximum

• Terminal Location

  radially positioned over less than half the circumference

• Pilot Length

  0.0380 inches minimum and 0.0420 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Actuator Travel Control Feature

  continuous motion

• Screw Thread Series Designator

  unc

• Undercut Width

  0.0580 inches minimum and 0.0660 inches maximum

• Reliability Indicator

  not established

• Angle Of Mounting Hole In Deg

  60.0

• Actuator Type

  single shaft

• Terminal Type And Quantity

  3 solder stud

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Body Length

  0.562 inches nominal

• Shaft Diameter

  0.125 inches nominal

• Overall Length

  1.062 inches nominal

• Effective Electrical Rotation In Deg Angular Rotation

  353.0 nominal

• Function Conformity Per Section

  single section terminal base linearity

• Body Style

  cylindrical servo mounted

• Mounting Lip Depth

  0.0560 inches minimum and 0.0640 inches maximum

• Mounting Facility Quantity

  3

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Power Dissipation Rating Per Section In Watts

  1.5 heat sink single section

• Mounting Lip Diameter

  1.0880 inches minimum and 1.0930 inches maximum

• Electrical Resistance Per Section

  2.500 kilohms single section

• Overall Diameter

  1.281 inches nominal

• Screw Thread Quantity Per Inch

  56.0

• Pilot Diameter

  1.0295 inches minimum and 1.0300 inches maximum

• Features Provided

  nonmetallic shaft

• Screw Thread Diameter

  0.086 inches nominal

• Shaft Style

  round, slotted

• Function Conformity Tolerance Per Section

  -0.10/+0.10 single section

• Maximum Starting Torque

  0.075 inch-ounces

• Undercut Diameter

  0.9975 inches minimum and 1.0025 inches maximum