747-6025
Resistors
RESISTOR,VARIABLE,WIRE WOUND,PRECISION
747-6025
RESISTOR,VARIABLE,WIRE WOUND,PRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Mounting Hole/Stud Circle Diameter
1.219 inches minimum and 1.281 inches maximum
-
Power Dissipation Rating Per Section In Watts
3.5 free air single section
-
Overall Diameter
2.250 inches nominal
-
Mounting Lip Depth
0.0620 inches minimum and 0.1240 inches maximum
-
Electrical Resistance Per Section
10.0 kilohms single section
-
Function Conformity Per Section
single section independent linearity
-
Effective Electrical Rotation In Deg Angular Rotation
352.0 nominal
-
Angle Of Mounting Hole In Deg
0.0
-
Shaft Bearing Type
sleeve
-
Body Diameter
1.969 inches minimum and 2.031 inches maximum
-
Overall Length
1.807 inches nominal
-
Shaft Style
round
-
Terminal Type And Quantity
3 tab, solder lug
-
Mounting Facility Quantity
3
-
Resistance Tolerance Per Section In Percent
-5.0/+5.0 single section
-
Shaft Diameter
0.250 inches nominal
-
Body Style
cylindrical servo mounted
-
Maximum Starting Torque
1.00 inch-ounces
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
40.0 single section
-
Mounting Lip Diameter
1.9690 inches minimum and 2.0310 inches maximum
-
Rotary Actuator Travel In Angular Deg
360.0 nominal
-
Actuator Type
single shaft
-
Reliability Indicator
not established
-
Screw Thread Series Designator
unc
-
Pilot Diameter
1.8740 inches minimum and 1.8750 inches maximum
-
Actuator Travel Control Feature
continuous motion
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
105.0 single section
-
Terminal Location
radially positioned over less than half the circumference
-
Mounting Method
threaded hole
-
Function Conformity Tolerance Per Section
-0.15/+0.15 single section
-
Function Characteristic Per Section
single section linear
-
Body Length
0.995 inches maximum
-
Screw Thread Diameter
0.164 inches nominal
-
Undercut Diameter
1.874 inches minimum and 1.875 inches maximum
-
Undercut Width
0.0760 inches minimum
-
Pilot Length
0.3100 inches minimum and 0.9300 inches maximum
-
Angle Between Centerlines Of Mounting Holes In Deg
120.0
-
Shaft Length
0.657 inches nominal
-
Section Quantity
1
-
Screw Thread Quantity Per Inch
32.0