124083

Technical Characteristics

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Body Length

  0.140 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Shaft Diameter

  0.125 inches nominal

• Overall Length

  1.050 inches minimum and 1.080 inches maximum

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef

• Function Conformity Tolerance Per Section

  -0.50/+0.50 single section

• Mounting Bushing Length

  0.250 inches nominal

• Effective Electrical Rotation In Deg Angular Rotation

  300.0 minimum and 305.0 maximum

• Mounting Method

  standard bushing

• Maximum Starting Torque

  7.00 inch-ounces

• Test Data Document

  45413-124083 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.125 inches nominal

• Function Characteristic Per Section

  single section linear

• Screw Thread Diameter

  0.250 inches nominal

• Section Quantity

  1

• Body Diameter

  0.750 inches maximum

• Screw Thread Quantity Per Inch

  32.0

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  50.0 single section

• Actuator Travel Control Feature

  stops

• Terminal Location

  rear end

• Contact Arm Electrical Off Position

  fully cw

• Rotary Actuator Travel In Angular Deg

  334.0 minimum and 336.0 maximum

• Overall Diameter

  0.750 inches maximum

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Body Style

  cylindrical bushing mounted

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Shaft Length

  0.719 inches maximum

• Function Conformity Per Section

  single section independent linearity

• Center To Center Distance Between Terminals

  0.125 inches nominal

• Nonturn Device Location

  at 12 oclock

• Maximum Stop Torque

  64.00 inch-ounces

• Electrical Resistance Per Section

  500.0 ohms single section

• Shaft Style

  round

• Terminal Type And Quantity

  3 tab, solder lug