7717790P23

Technical Characteristics

• Shaft End Play

  0.005 inches

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Shaft Bearing Type

  ball

• Pilot Diameter

  0.6240 inches minimum and 0.6250 inches maximum

• Function Conformity Per Section

  single section independent linearity

• Undercut Width

  0.0570 inches minimum and 0.0670 inches maximum

• Shaft Diameter

  0.094 inches minimum and 0.156 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 single section

• Shaft Length

  0.644 inches minimum and 0.706 inches maximum

• Shaft Style

  round

• Terminal Type And Quantity

  3 tab, solder lug

• Function Conformity Tolerance Per Section

  -0.05/+0.05 single section

• Body Style

  cylindrical servo mounted

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Undercut Diameter

  0.850 inches nominal

• Shaft Radial Play

  0.002 inches

• Pilot Diameter Runout

  0.002 inches

• Lateral Runout

  0.002 inches

• Actuator Type

  single shaft

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Reliability Indicator

  not established

• Terminal Location

  upper adjacent side two rows

• Actuator Travel Control Feature

  continuous motion

• Body Diameter

  0.938 inches maximum

• Mounting Method

  clamp ring

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -40.0/+40.0 single section

• Standard Taper Curve Per Section

  a single section

• Rotary Actuator Travel In Angular Deg

  3780.0 nominal

• Body Length

  1.635 inches maximum

• Maximum Starting Torque

  0.50 inch-ounces

• Maximum Running Torque

  0.40 inch-ounces

• Tap Location Tolerance Per Section

  -10.0/+10.0 ohms single section

• Mounting Lip Diameter

  0.8700 inches minimum and 0.8800 inches maximum

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Function Characteristic Per Section

  single section linear

• Contact Arm Electrical Off Position

  fully ccw

• Section Quantity

  1

• Shaft Runout

  0.002 inches

• Fixed Tap Quantity Per Section

  2 single section

• Electrical Resistance Per Section

  5.0 kilohms single section