5091-1K

Technical Characteristics

• Fragility Factor

  moderately rugged

• Mounting Hole Diameter

  0.073 nominal mils and 0.083 nominal centimeters

• Rotary Actuator Travel In Angular Deg

  8280.0 minimum and 13680.0 maximum

• Body Style

  rectangular w/mounting holes

• Shaft Diameter

  0.058 inches minimum and 0.098 inches maximum

• Shaft Length

  0.045 inches maximum

• Shaft Style

  round, slotted

• Maximum Starting Torque

  10.00 inch-ounces

• Precious Material And Location

  terminal surface gold

• Electrical Resistance Per Section

  1.0 percent, rated amperes c and better flooring

• Shaft Bearing Type

  bearing

• Maximum Running Torque

  10.00 inch-ounces

• Precious Material

  gold

• Terminal Location

  right adjacent side two rows

• Body Width

  0.230 inches maximum

• Body Height

  0.490 inches minimum and 0.510 inches maximum

• Body Length

  0.490 inches minimum and 0.510 inches maximum

• Lateral Distance Between Mounting Hole Centers

  0.513 inches minimum and 0.526 inches maximum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Test Data Document

  94580-966034 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Effective Electrical Rotation In Deg Angular Rotation

  8280.0 minimum and 13680.0 maximum

• Terminal Length

  0.187 inches minimum

• Actuator Travel Control Feature

  clutch

• Center To Center Distance Between Terminal Rows

  0.095 inches minimum and 0.105 inches maximum

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.095 nominal mils and 0.105 nominal centimeters

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Power Dissipation Rating Per Section In Watts

  1.0 7th secondary quality

• Cubic Measure

  0.052 cubic inches

• Mounting Facility Quantity

  2

• Standard Taper Curve Per Section

  a single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 single section

• Mounting Method

  unthreaded hole

• Features Provided

  humidity proof

• Terminal Type And Quantity

  3 pin

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  175.0 single section

• Center To Center Distance Between Terminals

  0.195 inches minimum and 0.205 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Section Quantity

  1