556-119HS-1K
Resistors
RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION
556-119HS-1K
RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Fragility Factor
moderately rugged
-
Mounting Hole Diameter
0.073 nominal mils and 0.083 nominal centimeters
-
Rotary Actuator Travel In Angular Deg
8280.0 minimum and 13680.0 maximum
-
Body Style
rectangular w/mounting holes
-
Shaft Diameter
0.058 inches minimum and 0.098 inches maximum
-
Shaft Length
0.045 inches maximum
-
Shaft Style
round, slotted
-
Maximum Starting Torque
10.00 inch-ounces
-
Precious Material And Location
terminal surface gold
-
Electrical Resistance Per Section
1.0 percent, rated amperes c and better flooring
-
Shaft Bearing Type
bearing
-
Maximum Running Torque
10.00 inch-ounces
-
Precious Material
gold
-
Terminal Location
right adjacent side two rows
-
Body Width
0.230 inches maximum
-
Body Height
0.490 inches minimum and 0.510 inches maximum
-
Body Length
0.490 inches minimum and 0.510 inches maximum
-
Lateral Distance Between Mounting Hole Centers
0.513 inches minimum and 0.526 inches maximum
-
Resistance Tolerance Per Section In Percent
-5.0/+5.0 single section
-
Test Data Document
94580-966034 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
-
Effective Electrical Rotation In Deg Angular Rotation
8280.0 minimum and 13680.0 maximum
-
Terminal Length
0.187 inches minimum
-
Actuator Travel Control Feature
clutch
-
Center To Center Distance Between Terminal Rows
0.095 inches minimum and 0.105 inches maximum
-
Center To Center Distance Between Center Terminal And Outside Terminal
0.095 nominal mils and 0.105 nominal centimeters
-
Actuator Type
single shaft
-
Reliability Indicator
not established
-
Power Dissipation Rating Per Section In Watts
1.0 7th secondary quality
-
Cubic Measure
0.052 cubic inches
-
Mounting Facility Quantity
2
-
Standard Taper Curve Per Section
a single section
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-50.0/+50.0 single section
-
Mounting Method
unthreaded hole
-
Features Provided
humidity proof
-
Terminal Type And Quantity
3 pin
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
175.0 single section
-
Center To Center Distance Between Terminals
0.195 inches minimum and 0.205 inches maximum
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
70.0 single section
-
Section Quantity
1