819798-10

Technical Characteristics

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -85.0/+85.0 single section

• Actuator Travel Control Feature

  clutch

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Power Dissipation Rating Per Section In Watts

  1.0 7th secondary quality

• Shaft Length

  0.025 inches minimum and 0.045 inches maximum

• Mounting Facility Quantity

  2

• Standard Taper Curve Per Section

  a single section

• Electrical Resistance Per Section

  10.0 percent, rated amperes c and better flooring

• Mounting Method

  unthreaded hole

• Features Provided

  humidity proof

• Terminal Type And Quantity

  3 pin

• Terminal Length

  0.500 inches nominal

• Center To Center Distance Between Terminal Rows

  0.100 inches nominal

• Effective Electrical Rotation In Deg Angular Rotation

  9000.0 nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Section Quantity

  1

• Body Height

  0.490 inches minimum and 0.510 inches maximum

• Maximum Running Torque

  5.00 inch-ounces

• Body Length

  0.490 inches minimum and 0.510 inches maximum

• Special Features

  immersion sealed

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.100 nominal inches

• Body Style

  rectangular w/mounting holes

• Shaft Style

  round, slotted

• Maximum Starting Torque

  5.00 inch-ounces

• Center To Center Distance Between Terminals

  0.200 inches nominal

• Body Width

  0.210 inches minimum and 0.230 inches maximum

• Precious Material

  gold

• Precious Material And Location

  terminal surfaces gold

• Rotary Actuator Travel In Angular Deg

  9000.0 nominal

• Mounting Hole Diameter

  0.068 nominal mils and 0.088 nominal centimeters

• Terminal Location

  lower adjacent side two rows

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Lateral Distance Between Mounting Hole Centers

  0.513 inches minimum and 0.526 inches maximum

• Shaft Diameter

  0.065 inches minimum and 0.095 inches maximum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section