D10-09-228

Technical Characteristics

• ~1

  data on certain environmental and performanc

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Pilot Diameter

  0.6245 inches minimum and 0.6250 inches maximum

• Pilot Length

  0.0620 inches nominal

• Undercut Width

  0.0620 inches nominal

• Actuator Type

  single shaft

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Shaft End Play

  0.002 inches

• Reliability Indicator

  not established

• Body Length

  2.000 inches maximum

• Mounting Method

  clamp ring

• Lateral Runout

  0.005 inches

• Rotary Actuator Travel In Angular Deg

  3780.0 nominal

• Terminal Location

  radially positioned over less than half the circumference

• Shaft Diameter

  0.124 inches nominal

• Shaft Runout

  0.001 inches

• Function Characteristic Per Section

  single section linear

• Electrical Resistance Per Section

  20.0 kilohms single section

• Maximum Starting Torque

  0.60 inch-ounces

• Maximum Stop Torque

  56.00 inch-ounces

• Maximum Running Torque

  0.50 inch-ounces

• Test Data Document

  06481-mil-t-5422c specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type

• Actuator Travel Control Feature

  stops

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Section Quantity

  2

• Function Conformity Tolerance Per Section

  -0.10/+0.10 single section

• Shaft Bearing Type

  ball

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Fixed Tap Quantity Per Section

  1 1st section

• Mounting Lip Diameter

  0.8750 inches nominal

• Features Provided

  nonmetallic shaft

• Shaft Length

  0.600 inches minimum and 0.660 inches maximum

• Mounting Lip Depth

  0.0620 inches nominal

• Fixed Tap Quantity Per Section

  1 2nd section

• Overall Diameter

  1.115 inches maximum

• Shaft Style

  round

• Tap Location From Ccw Terminal Per Section In Ohms

  10000.0 all sections

• Undercut Diameter

  0.6245 inches minimum and 0.625 inches maximum

• Mechanical Backlash In Deg Angular Rotation

  0.5

• Body Diameter

  0.930 inches maximum

• Body Style

  cylindrical servo mounted

• Function Conformity Per Section

  single section terminal base linearity

• Terminal Type And Quantity

  8 tab, solder lug

• Overall Length

  2.660 inches maximum

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  1800.0 all sections

• Pilot Diameter Runout

  0.0015 inches

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 single section