200S1-201M

Technical Characteristics

• Center To Center Distance Between Terminals

  0.672 inches minimum and 0.704 inches maximum

• Screw Thread Series Designator

  unf

• Body Style

  rectangular w/mounting holes/slots

• Shaft Style

  round, slotted

• Body Width

  0.234 inches minimum and 0.266 inches maximum

• Rotary Actuator Travel In Angular Deg

  9000.0 nominal

• Screw Thread Diameter

  0.216 inches nominal

• Mounting Hole Diameter

  0.086 inches minimum

• Terminal Location

  lower adjacent side single row

• Overall Length

  1.546 inches minimum and 1.610 inches maximum

• Power Dissipation Rating Per Section In Watts

  0.5 heat sink single section

• Electrical Resistance Per Section

  200.0 ohms single section

• Overall Width

  0.343 inches minimum and 0.375 inches maximum

• Lateral Distance Between Mounting Hole Centers

  0.995 inches minimum and 1.005 inches maximum

• Overall Height

  0.547 inches minimum and 0.611 inches maximum

• Actuator Travel Control Feature

  clutch

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Body Length

  1.312 inches minimum and 1.344 inches maximum

• Mounting Facility Quantity

  2

• Terminal Length

  0.172 inches minimum and 0.204 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  105.0 single section

• Standard Taper Curve Per Section

  a single section

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 single section

• Shaft Length

  0.047 inches minimum and 0.079 inches maximum

• Shaft Diameter

  0.109 inches minimum and 0.141 inches maximum

• Terminal Type And Quantity

  3 pin

• Maximum Starting Torque

  7.50 inch-ounces

• Mounting Method

  shaft w/panel seal and standard bushing

• Effective Electrical Rotation In Deg Angular Rotation

  9000.0 nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Screw Thread Quantity Per Inch

  28.0

• Section Quantity

  1

• Body Height

  0.328 inches minimum and 0.360 inches maximum

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.312 inches minimum and 0.344 inches maximum