8440

Technical Characteristics

• Terminal Type And Quantity

  3 turret

• Shaft End Play

  0.005 inches

• Terminal Location

  rear end

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -400.0/+400.0 single section

• Shaft Style

  round, slotted

• Body Length

  0.641 inches minimum and 0.672 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  340.0 nominal

• Power Dissipation Rating Per Section In Watts

  0.5 free air single section

• Undercut Width

  0.0570 inches minimum and 0.0670 inches maximum

• Pilot Diameter

  0.7490 inches minimum and 0.7500 inches maximum

• Undercut Diameter

  0.781 inches maximum

• Mounting Method

  servo mounting

• Pilot Diameter Runout

  0.001 inches

• Body Diameter

  0.870 inches minimum and 0.880 inches maximum

• Electrical Resistance Per Section

  1.0 megohms single section

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Maximum Starting Torque

  1.00 inch-ounces

• Maximum Running Torque

  1.00 inch-ounces

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Actuator Travel Control Feature

  continuous motion

• Overall Diameter

  0.870 inches minimum and 0.880 inches maximum

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Standard Taper Curve Per Section

  a single section

• Shaft Length

  0.484 inches minimum and 0.516 inches maximum

• Shaft Diameter

  0.128 inches nominal

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Mounting Lip Diameter

  0.8700 inches minimum and 0.8800 inches maximum

• Shaft Runout

  0.001 inches

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Overall Length

  1.312 inches nominal

• Section Quantity

  1

• Test Data Document

  88818-c603100239 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)