D10-18-109

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Body Diameter

  1.830 inches maximum

• Power Dissipation Rating Per Section In Watts

  2.0 free air all sections

• Pilot Diameter Runout

  0.0005 inches

• Undercut Width

  0.0780 inches minimum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Maximum Starting Torque

  2.30 inch-ounces

• Fixed Tap Quantity Per Section

  1 all sections

• Body Style

  cylindrical servo mounted

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Pilot Length

  0.0620 inches nominal

• Body Length

  1.688 inches maximum

• Actuator Type

  single shaft

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Reliability Indicator

  not established

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  130.0 all sections

• Tap Location From Ccw Terminal Per Section In Ohms

  5000.0 all sections

• Mounting Method

  clamp ring

• Shaft Runout

  0.0005 inches

• Shaft End Play

  0.003 inches

• Pilot Diameter

  1.5620 inches maximum

• Terminal Type And Quantity

  8 turret

• Tap Location Tolerance Per Section

  -1.0/+1.0 ohms all sections

• Function Conformity Per Section

  all sections terminal base linearity

• Shaft Diameter

  0.1248 inches maximum

• Function Conformity Tolerance Per Section

  -0.075/+0.075 all sections

• Shaft Length

  0.437 inches nominal

• Undercut Diameter

  1.625 inches maximum

• Terminal Location

  longitudinally positioned on the circumference

• Section Quantity

  2

• Function Characteristic Per Section

  all sections graph

• Shaft Style

  round, slotted

• Shaft Bearing Type

  ball

• Electrical Resistance Per Section

  10.0 kilohms all sections

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 all sections

• Maximum Running Torque

  1.80 inch-ounces

• Test Data Document

  06481-900217-123 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Lip Depth

  0.0620 inches nominal

• Mounting Lip Diameter

  1.8120 inches maximum

• Shaft Radial Play

  0.0005 inches