900217-125

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Undercut Width

  0.0720 inches minimum

• Body Diameter

  1.830 inches maximum

• Power Dissipation Rating Per Section In Watts

  2.0 free air all sections

• Section Quantity

  2

• Maximum Stop Torque

  200.00 inch-ounces

• Shaft Style

  round, slotted

• Shaft End Play

  0.00500 inches

• Shaft Bearing Type

  ball

• Maximum Running Torque

  1.80 inch-ounces

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -25.0/+25.0 all sections

• Mounting Lip Depth

  0.0620 inches nominal

• Maximum Starting Torque

  5.30 inch-ounces

• Mounting Lip Diameter

  1.8120 inches nominal

• Shaft Radial Play

  0.0005 inches

• Shaft Diameter

  0.1248 inches nominal

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Body Length

  1.700 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  3780.0 nominal

• Fixed Tap Quantity Per Section

  1 all sections

• Body Style

  cylindrical servo mounted

• Terminal Type And Quantity

  8 tab, solder lug

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  1800.0 all sections

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Angle Between Centerlines Of Mounting Holes In Deg

  any acceptable

• Pilot Length

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  130.0 all sections

• Angle Of Mounting Hole In Deg

  any acceptable

• Standard Taper Curve Per Section

  a all sections

• Mounting Method

  clamp ring

• Shaft Runout

  0.0005 inches

• Terminal Location

  radially positioned over less than half the circumference

• Tap Location Tolerance Per Section

  -3.0/+3.0 deg angular rotation all sections

• Pilot Diameter

  1.5620 inches nominal

• Electrical Resistance Per Section

  20.000 kilohms all sections

• Undercut Diameter

  any acceptable

• Mounting Hole/Stud Circle Diameter

  any acceptable

• Shaft Length

  0.437 inches nominal