11228-003

Technical Characteristics

• Mounting Facility Quantity

  2

• Maximum Running Torque

  8.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Standard Taper Curve Per Section

  a single section

• Cubic Measure

  0.125 cubic inches

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Terminal Length

  0.469 inches minimum and 0.531 inches maximum

• Features Provided

  humidity proof

• Terminal Type And Quantity

  3 pin

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  175.0 single section

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.295 inches minimum and 0.305 inches maximum

• Mounting Hole Diameter

  0.088 inches minimum and 0.098 inches maximum

• Body Width

  0.283 inches minimum and 0.297 inches maximum

• Section Quantity

  1

• Maximum Starting Torque

  8.00 inch-ounces

• Body Height

  0.328 inches minimum and 0.359 inches maximum

• Fragility Factor

  moderately rugged

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Body Style

  rectangular w/mounting holes/slots

• Shaft Style

  round, slotted

• Effective Electrical Rotation In Deg Angular Rotation

  9360.0 minimum and 10080.0 maximum

• Shaft Diameter

  0.120 inches minimum and 0.130 inches maximum

• Shaft Bearing Type

  bearing

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -250.0/+0.0 single section

• Terminal Location

  lower adjacent side two rows

• Center To Center Distance Between Terminals

  0.695 inches minimum and 0.705 inches maximum

• Electrical Resistance Per Section

  100.0 kilohms single section

• Lateral Distance Between Mounting Hole Centers

  0.995 inches minimum and 1.005 inches maximum

• Body Length

  1.234 inches minimum and 1.266 inches maximum

• Mounting Method

  terminal and unthreaded hole

• Shaft Length

  0.040 inches minimum and 0.060 inches maximum

• Center To Center Distance Between Terminal Rows

  0.095 inches minimum and 0.105 inches maximum

• Rotary Actuator Travel In Angular Deg

  9360.0 minimum and 10080.0 maximum

• Actuator Type

  single shaft

• Reliability Indicator

  not established