KC11-01X3/8001
Resistors
RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION
KC11-01X3/8001
RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Undercut Diameter
0.116 inches minimum and 0.119 inches maximum
-
Body Length
1.260 inches maximum
-
Shaft Bearing Type
ball
-
Actuator Type
double ended shaft
-
Section Quantity
3
-
Shaft Runout
0.006 inches
-
Undercut Width
0.0500 inches minimum and 0.0700 inches maximum
-
Features Provided
nonmetallic shaft
-
Undercut Diameter
1.0295 inches minimum and 1.030 inches maximum
-
Pilot Diameter
1.0295 inches minimum and 1.0300 inches maximum
-
Undercut Length
0.012 inches minimum and 0.014 inches maximum
-
Body Diameter
1.080 inches minimum and 1.100 inches maximum
-
Pilot Diameter Runout
0.001 inches
-
Shaft Style
round, stepped
-
Fixed Tap Quantity Per Section
1 all sections
-
Mechanical Backlash In Deg Angular Rotation
0.5
-
Shaft End Play
0.001 inches
-
Shaft Radial Play
0.001 inches
-
Body Style
cylindrical servo mounted
-
Lateral Runout
0.001 inches
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
40.0 all sections
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
125.0 all sections
-
Shaft Diameter
0.125 inches nominal
-
Rotary Actuator Travel In Angular Deg
360.0 nominal
-
Reliability Indicator
not established
-
Shaft Length
0.743 inches minimum and 0.812 inches maximum
-
Actuator Travel Control Feature
continuous motion
-
Mounting Method
clamp ring
-
Effective Electrical Rotation In Deg Angular Rotation
343.0 nominal
-
Resistance Tolerance Per Section In Percent
-10.0/+10.0 all sections
-
Electrical Resistance Per Section
20.0 kilohms all sections
-
Terminal Type And Quantity
12 turret
-
Tap Location From Ccw Terminal Per Section In Ohms
100.0 all sections
-
Power Dissipation Rating Per Section In Watts
1.0 free air all sections
-
Maximum Starting Torque
0.60 inch-ounces
-
Mounting Lip Diameter
1.0800 inches minimum and 1.1000 inches maximum
-
Maximum Running Torque
0.50 inch-ounces
-
Terminal Location
radially positioned over more than half the circumference
-
Mounting Lip Depth
0.0500 inches minimum and 0.0700 inches maximum
-
Pilot Length
0.0300 inches minimum and 0.0500 inches maximum
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-400.0/+400.0 all sections