220214-AA1

Technical Characteristics

• Switch Actuator Positioning Increment

  45.0 degrees single actuator

• Shaft Type

  round, parallel flatted, threaded hole single actuator

• Err Default

  err default and err default

• First Flat Length

  0.265 inches minimum single actuator and 0.297 inches maximum single actuator

• Nominal Thread Size

  0.375 inches single mounting facility

• Overall Width

  0.933 inches minimum and 0.943 inches maximum

• Pole Quantity

  1 single section rear

• Width Between Flats

  0.187 inches minimum single actuator and 0.189 inches maximum single actuator

• Mounting Method

  threaded bushing w/panel seal single mounting facility

• Contact Switching Action

  makes before breaks single section rear

• Thread Class

  2a single mounting facility

• Nonturn Device Type

  tab at 3:00 o'clock

• Operating Temp Range

  -40.0/+85.0 deg celsius

• Terminal Type

  tab, solder lug

• Overall Height

  0.995 inches minimum and 1.000 inches maximum

• Shaft Flat/Slot Angular Location

  90.0 degrees from nonturn device single actuator

• Contact Voltage Rating In Volts

  110.0 ac at sea level

• Switch Contact Basic Design

  nonpile-up symmetrical

• Thread Series Designator

  unef single mounting facility

• Switch Actuator Indexing Position Quantity

  2 single actuator

• Shaft Diameter

  0.248 inches minimum single actuator and 0.250 inches maximum single actuator

• Individual Section Quantity

  1

• Style Designator

  circular wafer, bushing mount

• Contact Load Current Rating

  1.0 amperes resistive load dc at sea level

• Overall Length

  1.468 inches minimum and 1.483 inches maximum

• Switch Actuator Stop Device Type

  fixed stop single actuator

• Throw Quantity

  2 single section rear

• Shaft Length

  0.718 inches minimum single actuator and 0.733 inches maximum single actuator

• Contact Load Current Rating

  0.5 amperes resistive load ac at sea level

• Contact Voltage Rating In Volts

  28.0 dc at sea level

• Nonturn Device Radius

  0.365 inches minimum at 3:00 o'clock and 0.385 inches maximum at 3:00 o'clock

• Detent Rotational Torque Range

  +1.000/+5.000 inch-pounds single actuator

• Test Data Document

  80063-smd415284 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)