2325490

Technical Characteristics

• Overall Diameter

  1.707 inches maximum

• Power Dissipation Rating Per Section In Watts

  2.0 free air all sections

• Shaft Length

  0.688 inches nominal

• Body Length

  2.080 inches maximum

• Fixed Tap Quantity Per Section

  6 all sections

• Function Characteristic Per Section

  all sections linear

• Section Quantity

  3

• Effective Electrical Rotation In Deg Angular Rotation

  352.0 minimum and 356.0 maximum

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  10.0 all sections and 125.0 all sections and 214.0 all sections and 79.0 all sections and 44.5 all sections and 309.0 all sections

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 all sections

• Maximum Starting Torque

  2.20 inch-ounces

• Mounting Lip Diameter

  2.0800 inches maximum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Shaft Style

  round

• Undercut Width

  0.0730 inches minimum

• Electrical Resistance Per Section

  24.0 kilohms all sections

• Function Conformity Tolerance Per Section

  -0.20/+0.20 all sections

• Body Style

  cylindrical servo mounted

• Body Diameter

  1.422 inches minimum and 1.454 inches maximum

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Function Conformity Per Section

  all sections independent linearity

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Actuator Travel Control Feature

  continuous motion

• Terminal Type And Quantity

  27 solder stud

• Mounting Method

  clamp ring

• Overall Length

  2.924 inches maximum

• Pilot Diameter

  1.3120 inches nominal

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Test Data Document

  56232-2325490 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Shaft Diameter

  0.2494 inches minimum and 0.2497 inches maximum

• Undercut Diameter

  1.312 inches maximum

• Maximum Running Torque

  1.50 inch-ounces

• Terminal Location

  radially positioned over more than half the circumference

• Mounting Lip Depth

  0.0880 inches minimum and 0.0980 inches maximum