AP18C71

Technical Characteristics

• Terminal Type And Quantity

  3 turret

• Shaft End Play

  0.005 inches

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Electrical Resistance Per Section

  10.0 kilohms single section

• Power Dissipation Rating Per Section In Watts

  3.0 free air single section

• Function Conformity Per Section

  single section independent linearity

• Features Provided

  nonmetallic shaft

• Function Conformity Tolerance Per Section

  -7.50/+7.50 single section

• Shaft Length

  0.662 inches minimum and 0.682 inches maximum

• Shaft Style

  round

• Undercut Width

  0.0730 inches minimum

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Shaft Diameter

  0.245 inches minimum and 0.250 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Mounting Lip Depth

  0.0880 inches minimum and 0.0980 inches maximum

• Overall Length

  1.922 inches nominal

• Undercut Diameter

  1.625 inches maximum

• Pilot Diameter Runout

  0.002 inches

• Lateral Runout

  0.002 inches

• Overall Diameter

  1.938 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Terminal Location

  upper adjacent side two rows

• Test Data Document

  10001-1855939 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Lip Diameter

  1.7450 inches minimum and 1.7800 inches maximum

• Actuator Travel Control Feature

  continuous motion

• Body Diameter

  1.750 inches nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Mounting Method

  clamp ring

• Effective Electrical Rotation In Deg Angular Rotation

  360.0 nominal

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Maximum Starting Torque

  0.50 inch-ounces

• Shaft Runout

  0.001 inches

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Body Length

  1.250 inches nominal

• Function Characteristic Per Section

  single section linear

• Section Quantity

  1

• Pilot Diameter

  1.5610 inches minimum and 1.5620 inches maximum