71-113-5MG6

Technical Characteristics

• Body Style

  multipole-multiple actuator type

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  125.0 all locations

• Body Width

  1.485 inches minimum and 1.515 inches maximum

• Switch Contact Arrangement

  single pole, double throw

• Test Data Document

  05869-711570 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Operating Voltage Type And Rating Per Pole In Volts

  250.0 ac all locations and 50.0 dc all locations

• Switch Voltage Rating And Type In Volts

  115.0 ac and 50.0 dc

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  1000.0 ac all locations and 2000.0 dc all locations

• Trip Delay Time In Seconds Per Rated Continuous Current

  3.000 minimum at 200 pct all locations and 10.000 maximum at 200 pct all locations

• Inclosure Protection Type For Which Designed

  shock resistant and vibration resistant and moisture resistant and salt spray proof

• Nominal Thread Size

  0.138 inches

• Body Length

  2.485 inches minimum and 2.515 inches maximum

• Frequency In Hertz

  60.0 all locations

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

  0.735 inches minimum and 0.765 inches maximum

• Main Contact Tripping Mechanism Type

  trip free

• Boss Height

  0.125 inches minimum and 0.155 inches maximum

• Arc Quenching Method

  magnetic blowout

• Manual Actuator Type And Quantity

  2 toggle

• Auxiliary Switch Function And Quantity

  1 alarm

• Mounting Surface To Terminal End Distance

  2.583 inches minimum and 2.763 inches maximum

• Terminal Type And Quantity

  4 threaded stud

• External Actuator Linkage Arrangement

  one and two linked

• Switch Location And Position Designation

  internal at pole one

• Case Material

  plastic

• Fragility Factor

  moderately rugged

• Switch Terminal Type

  tab, solder lug

• Special Handling Feature

  magnetic

• Circuit Protection Type

  overcurrent all locations

• Center To Center Distance Between Terminals Parallel To Width

  0.735 inches minimum and 0.765 inches maximum

• Center To Center Distance Between Terminals Parallel To Length

  1.925 inches minimum and 1.955 inches maximum

• Pole Quantity

  2

• Maximum Continuous Load Current Rating Per Pole

  2.0 amperes ac all locations and 2.0 amperes dc all locations

• Thread Series Designator

  unc

• Actuator Position Designation

  at each pole

• Reset Method

  manual

• Storage Type

  general purpose warehouse

• Switch Current Rating And Type In Amps

  5.0 ac and 1.0 dc

• Trip Release Characteristic

  time delay all locations

• Actuator Function

  trip-reset

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

  2.047 inches minimum and 2.077 inches maximum

• Internal Trip Release Configuration

  series trip all locations

• Mounting Facility Type And Quantity

  4 threaded hole

• Thread Quantity Per Inch

  32

• Unpackaged Unit Weight

  0.547 pounds

• Trip Release Method

  magnetic all locations