500-5028
Resistors
RESISTOR,VARIABLE,WIRE WOUND,PRECISION
500-5028
RESISTOR,VARIABLE,WIRE WOUND,PRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Section Quantity
2
-
Undercut Width
0.0680 inches nominal
-
Power Dissipation Rating Per Section In Watts
0.1 free air all sections
-
Shaft Bearing Type
ball
-
Function Characteristic Per Section
all sections linear
-
Overall Length
3.282 inches minimum and 3.384 inches maximum
-
Terminal Type And Quantity
6 tab, solder lug
-
Mounting Lip Diameter
0.8750 inches nominal
-
Mounting Lip Depth
0.0620 inches nominal
-
Function Conformity Tolerance Per Section
-0.05/+0.05 2nd section
-
Shaft Style
round
-
Resistance Tolerance Per Section In Percent
-1.0/+1.0 all sections
-
Body Diameter
0.870 inches minimum and 0.880 inches maximum
-
Body Style
cylindrical servo mounted
-
Maximum Starting Torque
1.00 inch-ounces
-
Function Conformity Tolerance Per Section
-0.025/+0.025 1st section
-
Maximum Running Torque
1.00 inch-ounces
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-70.0/+70.0 all sections
-
Shaft Diameter
0.1248 inches minimum and 0.125 inches maximum
-
Shaft Runout
0.002 inches
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
100.0 all sections
-
Electrical Resistance Per Section
10.0 percent, rated amperes c and better finish
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
125.0 all sections
-
Shaft Radial Play
0.002 inches
-
Undercut Diameter
0.625 inches maximum
-
Pilot Diameter
0.6245 inches minimum and 0.6250 inches maximum
-
Function Conformity Per Section
all sections independent linearity
-
Pilot Diameter Runout
0.002 inches
-
Pilot Length
0.0620 inches nominal
-
Electrical Resistance Per Section
2.96 percent, rated amperes c and better industrial clears
-
Actuator Type
single shaft
-
Shaft End Play
0.002 inches
-
Reliability Indicator
not established
-
Overall Diameter
0.870 inches minimum and 0.880 inches maximum
-
Mounting Method
clamp ring
-
Shaft Length
0.281 inches minimum and 0.343 inches maximum
-
Terminal Location
radially positioned over less than half the circumference
-
Body Length
3.001 inches minimum and 3.041 inches maximum