160-009-50

Technical Characteristics

• Trip Delay Time In Seconds Per Rated Continuous Current

  15.000 minimum at 200 pct single location and 2.000 minimum at 400 pct single location and 55.000 maximum at 200 pct single location and 7.000 maximum at 400 pct single location

• Mounting Surface To Terminal End Distance

  2.234 inches maximum

• Bushing Length

  0.250 inches nominal

• Maximum Continuous Load Current Rating Per Pole

  50.0 amperes ac single location and 50.0 amperes dc single location

• Thread Series Designator

  unc

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

  1.812 inches nominal

• Reset Method

  manual

• Actuator Position Designation

  at pole one

• Actuator Function

  trip-reset

• Body Width

  0.760 inches maximum

• Manual Actuator Type And Quantity

  1 push button

• Terminal Type And Quantity

  2 screw

• Mounting Facility Type And Quantity

  2 threaded hole

• Thread Quantity Per Inch

  32

• Circuit Protection Type

  overcurrent single location

• Center To Center Distance Between Terminals Parallel To Length

  1.437 inches nominal

• Trip Release Method

  thermal single location

• Pole Quantity

  1

• Internal Trip Release Configuration

  series trip single location

• Nominal Thread Size

  0.138 inches

• Trip Release Characteristic

  time delay single location

• Trip Release Ambient Temp Rating

  25.0 deg celsius nominal single location

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  125.0 single location

• Main Contact Tripping Mechanism Type

  trip free

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  3500.0 ac single location and 3500.0 dc single location

• Frequency In Hertz

  400.0 single location

• Inclosure Protection Type For Which Designed

  general purpose

• Body Style

  single pole type

• Body Length

  2.187 inches maximum

• Operating Voltage Type And Rating Per Pole In Volts

  120.0 ac single location and 30.0 dc single location

• Case Material

  plastic