977-6006

Technical Characteristics

• Fixed Tap Quantity Per Section

  2 1st section

• Mounting Lip Diameter

  0.7450 inches minimum and 0.7550 inches maximum

• Shaft Runout

  0.001 inches

• Body Length

  1.145 inches minimum and 1.155 inches maximum

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Fixed Tap Quantity Per Section

  2 2nd section

• Body Diameter

  0.745 inches minimum and 0.775 inches maximum

• Shaft Length

  0.375 inches nominal

• Electrical Resistance Per Section

  1.0 percent, rated amperes c and better finish

• Undercut Width

  0.0570 inches minimum

• Terminal Location

  radially positioned over more than half the circumference

• Function Conformity Tolerance Per Section

  -0.35/+0.35 all sections

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  100.0 all sections

• Terminal Type And Quantity

  10 turret

• Electrical Resistance Per Section

  500.0 ohms c and better industrial clears

• Effective Electrical Rotation In Deg Angular Rotation

  352.0 nominal

• Overall Length

  1.611 inches maximum

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  40.4 1st section and 196.2 1st section

• Maximum Starting Torque

  0.20 inch-ounces

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  40.4 2nd section and 80.8 2nd section

• Pilot Diameter Runout

  0.001 inches

• Shaft Style

  round

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 all sections

• Maximum Running Torque

  0.20 inch-ounces

• Undercut Diameter

  0.651 inches minimum and 0.661 inches maximum

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Pilot Diameter

  0.6245 inches minimum and 0.6250 inches maximum

• Function Conformity Per Section

  all sections independent linearity

• Tap Location Tolerance Per Section

  -1.0/+1.0 deg angular rotation all sections

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Actuator Travel Control Feature

  continuous motion

• Mounting Method

  clamp ring

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Shaft Diameter

  0.124 inches minimum and 0.125 inches maximum

• Section Quantity

  2

• Power Dissipation Rating Per Section In Watts

  0.5 free air all sections

• Shaft Bearing Type

  ball

• Function Characteristic Per Section

  all sections linear

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 all sections