AP20C225-3
Resistors
RESISTOR,VARIABLE,WIRE WOUND,PRECISION
AP20C225-3
Ace Electronics Associates Inc
RESISTOR,VARIABLE,WIRE WOUND,PRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Rotary Actuator Travel In Angular Deg
360.0 nominal
-
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation
180.0 all sections
-
Mounting Method
clamp ring
-
Terminal Location
radially positioned over less than half the circumference
-
Pilot Diameter Runout
0.00100 inches
-
Lateral Runout
0.001 inches
-
Shaft End Play
0.00001 inches
-
Maximum Running Torque
0.50 inch-ounces (ounce-inches)
-
Actuator Type
single shaft
-
Shaft Bearing Type
ball
-
Mounting Lip Diameter
2.0000 inches nominal
-
Overall Diameter
2.266 inches nominal
-
Body Length
2.282 inches maximum
-
Shaft Length
0.563 inches nominal
-
Shaft Diameter
0.2495 inches minimum and 0.250 inches maximum
-
Overall Length
2.845 inches maximum
-
Pilot Length
0.0620 inches nominal
-
Reliability Indicator
not established
-
Actuator Travel Control Feature
continuous motion
-
Power Dissipation Rating Per Section In Watts
3.0 free air all sections
-
Terminal Type And Quantity
14 turret
-
Precious Material
gold
-
Precious Material And Location
terminal surface gold
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
85.0 all sections
-
Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius
m20.0/p20.0 all sections
-
Function Characteristic Per Section
all sections 360 deg sine-cosine
-
Resistance Tolerance Per Section In Percent
m5.0/p5.0 all sections
-
Tap Location Tolerance Per Section
m1.0/p1.0 deg angular rotation all sections
-
Fixed Tap Quantity Per Section
1 all sections
-
Function Conformity Per Section
all sections absolute conformity
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
125.0 all sections
-
Function Conformity Tolerance Per Section
m0.50/p0.50 all sections
-
Electrical Resistance Per Section
483.000 ohms 1st section
-
Electrical Resistance Per Section
235.000 ohms 2nd section
-
Fragility Factor
rugged
-
Shaft Runout
0.001 inches
-
Maximum Starting Torque
0.50 inch-ounces (ounce-inches)
-
Effective Electrical Rotation In Deg Angular Rotation
360.0 nominal
-
Mounting Lip Depth
0.0930 inches nominal
-
Body Diameter
2.000 inches nominal
-
Undercut Width
0.0730 inches minimum
-
Undercut Diameter
1.875 inches maximum
-
Pilot Diameter
1.8740 inches minimum and 1.8750 inches maximum
-
Section Quantity
2